Home / Sealing & Packaging / Continuous Band Sealers / Vertical Continuous Band Sealer
Vertical Continuous Band Sealer
For bags that stand up rather than lie flat. A vertical band sealer feeds the bag upright through the sealing head, which suits liquid-holding pouches, tall packs and products that must not be laid down during sealing.
Every layer, and what it is actually made of.
Scroll to separate the machine into its load-bearing layers. Each part carries the material grade, the tolerance that matters, the warranty position and the supply-chain note behind it.
Scroll to expand · drag to rotate · click a part to inspect
Select a part on the diagram to inspect its specification.
- Material
- Key tolerance
- Performance
Material grades, tolerances and warranty positions are shown as typical values for this configuration. They are confirmed in writing per supplier route before you commit — we do not publish a grade we have not verified.
What this configuration means
Values are typical reference ranges. The final specification is confirmed per supplier route against your actual application.
| Orientation | Vertical |
|---|---|
| Seal width | Commonly 6–15 mm depending on model |
| Speed | Typically 0–12 m/min, adjustable |
| Bag type | Pre-made bags and pouches, standing |
| Heating | Continuous band, temperature controlled |
| Voltage | 220 V / 110 V depending on market |
| Typical use | Standing pouches, liquids, tall packs, retail food |
Where this machine is used
- Standing pouch sealing
- Liquid and semi-liquid packs
- Retail food and snacks
- Small-batch production
What we need from you
- Bag material and thickness
- Bag size and standing height
- Seal width and pattern required
- Throughput per shift
- Destination voltage
The options we compare for this machine
We do not publish factory names before you reach quotation stage. If we did, the cheapest quote would get copied within days and stop being real. So each option is shown by region and what stands behind it — names come when you are ready to order.
| Option | Quotes behind it | Made in |
|---|---|---|
| S016 | 2 | Zhejiang — Wenzhou |
| S025 | 2 | Zhejiang — Wenzhou |
| S009 | 1 | Zhejiang — Wenzhou |
Straight answers on Vertical Continuous Band Sealer
Vertical or horizontal band sealer?
It depends on how the filled bag behaves. If it stands and cannot be laid flat, use vertical. If it lies flat and can be supported, horizontal is usually faster and easier to run.
What materials can it seal?
Heat-sealable films — PE, PP, laminates and foil structures. The right temperature and speed depend on the material and thickness. Tell us the bag structure and we match the settings.
Related Continuous Band Sealers
Ready to check this machine for your site?
Send the load, lift height, battery strategy and destination port — we will confirm the configuration and compare routes.