Forklifts & packaging equipment, sourced from vetted Chinese factories WhatsApp +86 130 1131 9329 Telegram @ddbig
MMekSource
EN 中文
Send RFQ

Home / Comparisons

The choice, side by side

This is not a list of which option is "better" — each choice maps to a set of site conditions. Open any one and start with the one-line rule, then the detail.

Forklifts & material handling

Forklifts & material handling

Lead-acid vs Lithium (LiFePO4)

Decision rule

Choose on the shift pattern, not the sticker price: single shift with a ventilated charging room favours lead-acid; two or three shifts without a spare battery set favours lithium.

New vs Used

Decision rule

Used works for low-duty, non-critical handling when the machine can actually be inspected; new is the honest answer when uptime is critical or the duty cycle is heavy.

Buy vs Lease

Decision rule

Leasing moves residual-value risk to the lessor and keeps capital free; buying keeps the residual value but puts maintenance and battery replacement on you.

Electric vs Diesel

Decision rule

Indoor work and emissions rules favour electric; long outdoor shifts on rough ground without charging access still favour diesel.

Reach truck vs Counterbalance

Decision rule

Racking-only work in a tight aisle favours the reach truck; mixed duties, outdoor work and trailer loading favour the counterbalance.

Buy direct from a factory vs Buy through a sourcing partner

Decision rule

A factory gives you one catalogue and its own price; a sourcing partner gives you comparable quotes from several routes and one point of responsibility — at the cost of a margin.
Sealing & packaging equipment

Sealing & packaging equipment

Continuous band sealer vs Vacuum sealer

Decision rule

A band sealer closes a pouch; a vacuum sealer removes air to extend shelf life. If shelf life, moisture or oxidation is not the driver, band sealing is usually enough.

Chamber vacuum vs External (suction) vacuum

Decision rule

Wet, powdery or liquid-bearing products need a chamber machine; external suction suits dry goods and simple pouches.

Manual / semi-automatic vs Automatic

Decision rule

Below a few thousand cans a day, a manual or semi-automatic seamer with fast changeover usually beats an automatic one; above that, automation starts to pay.

Your case is not listed?

Describe the actual conditions and we will tell you which route fits.

Send Your Requirement WhatsApp us